24/7 on call

The Swiss Buildings Programme (Gebäudeprogramm / Programma Edifici) is a joint programme of the Confederation and the cantons that supports energy-related renovations of buildings. It funds measures such as insulating the building envelope, replacing fossil or direct electric heating with renewable systems, and comprehensive renovations. The programme is implemented by the cantons, so the conditions and amounts depend on the canton where the building is located, in this case Ticino. The most important rule: apply before starting work. The programme’s website gives an overview and links to each canton’s programme.

What the Swiss Buildings Programme funds

Area Examples
Building envelope Insulation of roof, walls, floors; sometimes windows as part of envelope measures
Renewable heating Heat pumps, wood heating, connection to district heating
Comprehensive renovations Projects reaching defined energy standards
Other measures Depending on canton, e.g. energy certificates with advisory reports

Which measures are funded, and how much, varies by canton and changes over time.

How it works with Ticino

The Confederation provides funds, and the cantons design and run their programmes within a national framework. In Ticino, the cantonal energy office manages the programme. Municipalities may offer additional support. The process for heat pumps is explained in heat pump subsidies in Ticino.

Typical conditions

  • Existing building (new buildings are generally not funded).
  • Application submitted before work starts.
  • Minimum requirements for the measures, such as insulation values.
  • Certain measures may require an energy certificate with an advisory report.
  • Completion within a deadline and proof of execution.

Step by step

  1. Assess the building, ideally with an energy certificate and advisory report.
  2. Define the measures and get quotes.
  3. Check the current cantonal programme on the Buildings Programme website.
  4. Submit the application with the required documents.
  5. Wait for confirmation before starting work.
  6. Carry out the work and submit completion documents.
  7. Receive the payment.

Combining with tax deductions

Energy-saving investments in existing buildings can generally be deducted from taxable income, but only the part not covered by subsidies. Under certain conditions, the part that cannot be deducted in the year of the expense can be carried forward to the next two tax periods; this is not automatic. The reform abolishing the imputed rental value comes into force on 1 January 2029 and also changes the deductions. Check the rules of the relevant tax year, the subsidies received and any carry-forward conditions with a tax adviser.

Energy certificate

The cantonal building energy certificate (GEAK, called CECE in Ticino) rates a building with three classifications (envelope efficiency, overall energy efficiency and direct CO₂ emissions). It is normally valid for 10 years, unless the building or its energy demand changes significantly; a provisional certificate for new buildings follows its own rules. The version with an advisory report suggests renovation measures and is a good starting point for planning and for some subsidy applications.

Planning the order of measures

Funding rules can influence the order of work. Insulating first and then installing a smaller heating system is often the most efficient path. If the heating must be replaced first, choose a system that will still fit after insulation. An advisory report helps put the steps in a sensible sequence.

Example: house in Minusio

An owner plans roof insulation and a heat pump. An energy certificate with advisory report recommends doing the roof first. Applications are submitted for both measures before work begins. The roof is insulated in spring, the heat pump installed in summer, sized for the improved building. Both subsidies are paid after the completion documents are submitted.

Documents you will typically need

  • Application form with owner and property details.
  • Quotes describing the planned measures and their technical data.
  • Photos of the current state, if requested.
  • Energy certificate with advisory report, where required.
  • After completion: invoices, proof of execution and, for heating, the commissioning report.

Keep copies of everything. Incomplete documents are a frequent cause of delays.

Who can help

Installers, energy consultants and certified energy certificate experts know the programme and can help prepare applications. The cantonal energy office answers questions about the Ticino programme, and your municipality can tell you about local grants.

Common mistakes

  • Starting work before approval.
  • Relying on outdated amounts or conditions.
  • Forgetting to keep invoices and documents.
  • Ignoring municipal programmes.

Frequently asked questions

Is the Buildings Programme the same everywhere in Switzerland?

The framework is national, but each canton sets its own conditions and amounts.

Can I apply for several measures at once?

Often yes; check the cantonal rules for combined projects.

Who submits the application?

Usually the owner, often with support from the installer or an energy consultant.

Support for your renovation

AcquaKlima Sagl prepares quotes and documents for heating projects and installs heat pumps across Ticino. Learn more about heating and heat pumps or get in touch.

From the blog

Need a quote or a call-out?

Call us or message us on WhatsApp: we reply in Italian, French, German and English.