24/7 on call

The combustion emissions check verifies that an oil or gas heating system meets the limits of the Swiss Ordinance on Air Pollution Control. In Ticino, the cantonal guidelines on combustion control set the procedure: the inspection interval (for example two, four or six years) depends on the system category and the conditions of the directive; it is not an automatic progression for every system that passes. If a limit is exceeded, a deadline for adjustment is set; if adjustment is not possible, a remediation deadline follows. The interval and any deadlines for adjustment or remediation depend on the system category, the measurement result and the authority’s decisions. The official inspection report and the cantonal directive in force are what count. Good maintenance improves the odds but does not guarantee the result.

Why the combustion emissions check exists in Ticino

Oil and gas heating releases pollutants such as carbon monoxide and nitrogen oxides, and oil systems can also produce soot. Federal law sets emission limits, and the cantons enforce them. The check ensures that systems burn cleanly and efficiently. A poorly adjusted boiler also uses more fuel and gets dirty faster.

What is measured

Measurement Meaning
Carbon monoxide (CO) Indicator of incomplete combustion
Nitrogen oxides (NOx) Pollutant depending on burner and settings
Soot number (oil) Cleanliness of combustion
Flue gas losses Heat escaping unused through the flue
Oil derivatives (oil) Unburnt fuel residues

The exact measurements and limits depend on fuel, output and the system’s age.

How often

The interval depends on the system category and the conditions set by the cantonal directive; it does not lengthen automatically. Your last inspection report usually shows when the next check is due; the responsible municipal office can also tell you. How servicing and the check relate is explained in burner maintenance in Ticino.

If the system fails

  1. Adjustment: usually a service and burner adjustment is enough, within the deadline stated in the report or decision.
  2. Follow-up check: the system is measured again after adjustment.
  3. Remediation: if the system cannot be adjusted to meet the limits, for example because the boiler or burner is outdated, a remediation deadline is set. Its length depends on the system category, the measurement result and the authority’s decision.

A remediation deadline is not a penalty but a planning horizon for replacing the system.

How to prepare

  • Schedule servicing shortly before the check, not years earlier.
  • Keep access to the boiler room clear.
  • Have the last service report ready.
  • Do not block or alter the measuring opening on the flue pipe.
  • In rented properties, inform tenants in advance.

Costs

The check is billed according to the cantonal or municipal tariff. Servicing and any adjustments are billed by your service company. A regularly serviced system rarely incurs extra costs for follow-up checks.

Servicing versus checking

The inspector measures; the service company fixes. The inspector determines whether limits are met but generally does not adjust the system. Servicing includes cleaning, replacing the nozzle and filter, adjusting the burner and taking its own measurements. Coordinating both avoids trouble.

Keeping the reports

Each check produces a report with measurements and results. Keep it with your service reports. When selling a property, applying for subsidies or planning a replacement, these documents are valuable. Rising values from check to check are an early sign that the boiler or burner is ageing.

Example: apartment building in Orselina

At the check, a twenty-year-old oil burner exceeds the CO limit. The administrator orders an adjustment. The technician cleans the boiler, replaces nozzle and filter and adjusts the air supply. The follow-up check passes. The technician also recommends planning the heating replacement, as spare parts are becoming scarce.

Rented and shared buildings

In apartment buildings, the owner or administrator organises the check. Tenants should be informed in advance, as access to the boiler room and occasionally to individual units may be needed. Depending on the rental contract and the applicable rules, the cost of the check may be included in the service charges as an operating cost; repairs or remediation work are not. Make sure someone with a key is present, otherwise a new appointment is needed.

Common mistakes

  • Skipping servicing and hoping for a good result.
  • Letting deadlines pass after a failed check.
  • Ignoring a remediation deadline until it expires.
  • Confusing the check with servicing.

Frequently asked questions

Are heat pumps checked too?

No, the combustion check applies to systems that burn fuel. Heat pumps have other obligations, such as refrigerant rules.

Who carries out the check?

Depending on the municipality, an appointed inspector or a municipal office, according to cantonal guidelines.

What if I miss the appointment?

Contact the responsible office and arrange a new date.

Service before the check

AcquaKlima Sagl services and adjusts oil and gas burners so your system passes the combustion check, across Ticino. Learn more about our burner service or get in touch.

From the blog

Need a quote or a call-out?

Call us or message us on WhatsApp: we reply in Italian, French, German and English.