24/7 on call

The difference between an air-source and a ground-source heat pump lies in where they take heat from. An air-source unit uses outdoor air: it is cheaper and quicker to install, but its efficiency varies with the weather and it needs an outdoor unit that must meet noise rules. A ground-source unit uses a borehole: the source temperature is stable all year, efficiency is higher and there is no outdoor unit, but drilling requires a permit, suitable geology and a larger investment. In the mild lakeside areas of Ticino, air-source systems are often the pragmatic choice; in colder locations, for larger buildings or where noise is critical, ground-source systems are worth a close look.

Air-source vs ground-source heat pump: side by side

Air-source Ground-source
Heat source Outdoor air Ground via borehole
Efficiency Good; varies with outdoor temperature Higher and more stable
Installation Simpler, quicker Drilling, permit, more complex
Space Outdoor unit position Drilling access, small surface footprint
Noise Outdoor unit; noise assessment No outdoor unit
Investment Lower Higher
Running costs Depend on climate and flow temperature Usually lower
Cooling option Active cooling possible with some units Gentle “free cooling” possible, with dew-point control

Permits and geology

Boreholes for ground-source heat pumps require a cantonal permit, and in some areas drilling is restricted, for example in groundwater protection zones. The installer or a drilling company checks feasibility early. Air-source systems need a municipal notification or permit and a noise assessment. See heat pump cost in Switzerland for how these affect the budget.

Climate and location

In milder areas, an air-source heat pump spends most of the winter in conditions where it works efficiently. In colder valleys, the stable ground temperature gives ground-source systems a bigger advantage. Our article on heat pumps in cold weather explains why.

Noise and neighbours

In dense neighbourhoods or terraced houses, finding a suitable place for an outdoor unit can be difficult. A ground-source system avoids the issue. Indoor-installed air-source units with ducts are another option, but they need space, wall openings and a noise check for the air grilles. In many split air-to-water heat pumps the compressor and fan sit in the outdoor unit, with only hydraulic and control components indoors, so the word split alone does not guarantee a quieter installation: noise depends on the model, placement and operation.

Gentle cooling in summer

A ground-source system can provide “free cooling” in summer, using very little electricity: the coolness of the borehole is transferred to the underfloor circuit through a suitable hydraulic configuration (for example a heat exchanger), not by simply pumping borehole water through the floor. Radiant cooling needs controls that monitor the dew point and manage condensation. This gentle cooling is pleasant and also helps regenerate the ground. Air-source heat pumps can cool actively, which uses more electricity.

Lifecycle view

The higher investment of a ground-source system is partly offset by lower running costs and the long life of the borehole, which can serve several generations of heat pumps. Whether this pays off depends on heat demand, energy prices and how long you plan to stay. A lifecycle comparison over many years gives a fairer picture than the purchase price alone.

How to decide

  1. Calculate the heat demand and required flow temperature.
  2. Check drilling feasibility and permits.
  3. Check outdoor unit positions and noise.
  4. Compare investment, running costs and subsidies over the expected life.
  5. Consider comfort factors: noise, cooling, space.

Example: two neighbours in Minusio

Two neighbours replace their oil boilers in the same year. One house has a large garden and the owner prefers a lower investment: an air-source heat pump is placed on the garden side with a noise assessment. The other house is on a narrow plot with bedrooms close to the boundary: drilling is feasible, and a ground-source system avoids any outdoor unit. Both are satisfied with their choice.

Hybrid and alternative solutions

Some homes do not fit neatly into either category. An air-source unit installed indoors with air ducts to the facade reduces outdoor noise. In larger buildings, several air-source units can work in cascade. Where drilling is not allowed, a ground collector laid horizontally in a large garden can be an option, although it needs a lot of space. In older buildings that still need high flow temperatures on the coldest days, a heat pump combined with the existing boiler can serve as a transitional solution. Each of these options has its own requirements, so a careful assessment is important.

Maintenance differences

Both systems need annual servicing. Air-source units need their outdoor coil cleaned and their defrost function checked. Ground-source systems have no outdoor unit, but the brine circuit pressure and antifreeze concentration should be checked periodically.

Common mistakes

  • Choosing by price alone.
  • Not checking drilling restrictions early.
  • Underestimating noise constraints for air-source units.
  • Ignoring flow temperature in either case.

Frequently asked questions

Can I drill a borehole anywhere?

No, a permit is required and some zones are restricted.

Is an air-source heat pump efficient enough in Ticino?

In most lakeside and lower areas, yes, if the system is well designed.

How deep is a borehole?

It depends on heat demand and geology; the drilling company calculates it.

Advice on choosing a heat pump

AcquaKlima Sagl compares air-source and ground-source options for your home across Ticino. Learn more about heating and heat pumps or get in touch.

From the blog

Need a quote or a call-out?

Call us or message us on WhatsApp: we reply in Italian, French, German and English.