24/7 on call

Bathroom ventilation removes the moisture produced by showers and baths before it settles on cold surfaces as condensation and feeds mould. In bathrooms with a window, opening it wide for a few minutes after showering usually works, combined with wiping down surfaces. Windowless bathrooms need a mechanical extractor fan that runs long enough after use, ideally with a humidity sensor or an overrun timer. Other factors matter too: a heated bathroom, an air inlet (such as a gap under the door), and fixing cold spots that attract condensation. Persistent mould after these steps calls for a closer look by a professional.

Why condensation and mould appear

Warm, moist air from the shower meets cold surfaces: the window, outer walls, the ceiling, tile corners. The moisture condenses. If surfaces stay damp for hours every day, mould spores find ideal conditions, especially in grout, silicone joints and behind furniture. Poor ventilation, a cold bathroom and thermal bridges are the main causes.

Bathrooms with a window

  1. After showering, open the window wide for a few minutes.
  2. Wipe glass and tiles with a squeegee.
  3. Keep the door closed so moisture does not spread through the home.
  4. Close the window again once the air is clear; tilting it for hours cools the walls.

Windowless bathrooms

Without a window, an extractor fan is essential. Points to consider:

Feature Why it matters
Sufficient airflow Removes moisture quickly
Overrun timer or humidity sensor Keeps running after the shower until moisture is gone
Quiet operation People do not switch it off because of noise
Non-return flap Prevents cold air or odours coming back
Air inlet A door gap or grille lets replacement air in

A fan that is wired to the light and stops when you switch the light off removes only part of the moisture.

Central ventilation systems

Many modern Swiss homes have a controlled ventilation system (Minergie standard and similar) that extracts air from bathrooms and kitchens continuously. These systems work well if filters are changed and grilles are clean. Blocking the extract grille, for example to stop a draught, undermines the system.

Heating the bathroom

A warm bathroom has warmer surfaces, so less condensation forms. A towel radiator or underfloor heating helps. Cold bathrooms on north-facing outer walls are particularly prone to mould. If the radiator is too small, consider a larger model or a supplementary heater.

Cleaning mould

  • Small spots on tiles and grout can be cleaned with a suitable mould remover; follow the instructions and ventilate.
  • Mouldy silicone joints usually need to be cut out and replaced.
  • Large areas, mould on walls or ceilings, or a musty smell from behind tiles need a professional assessment.

When it is more than ventilation

If mould appears despite good habits and a working fan, other causes may be involved: a hidden leak behind the tiles, failed waterproofing, a thermal bridge or rising damp. A professional can measure moisture and find the source. Leaks from concealed cisterns or shower connections are not unusual; see concealed cistern repair.

Retrofitting a fan

Retrofitting an extractor fan requires a route to the outside or to an existing duct, and an electrical connection. In apartment buildings, shared ducts may have rules. In rented homes, ask the landlord. Combining the work with a bathroom refresh avoids double work; see shower upgrade ideas.

Humidity levels

A simple hygrometer shows how quickly humidity drops after a shower. If it stays high for a long time, the ventilation is not sufficient. This simple measurement helps decide whether a stronger fan or a longer overrun is needed.

Example: windowless bathroom in Locarno

In an apartment, black spots keep appearing in the ceiling corners and grout. The extractor fan is wired to the light and stops as soon as the light goes off. The electrician fits a quiet fan with a humidity sensor, and a small gap is created under the door. The silicone joints are replaced. After a few weeks, the ceiling stays clean.

Common mistakes

  • Fans that stop when the light is switched off.
  • Tilted windows for hours in winter.
  • Blocking ventilation grilles.
  • Painting over mould without fixing the cause.

Frequently asked questions

How long should the extractor fan run after a shower?

Until the humidity has returned to normal levels; a humidity sensor handles this automatically.

Is bathroom mould dangerous?

Mould is undesirable indoors; find and fix its cause rather than treating only the symptoms. Remove it and fix the cause.

Can a dehumidifier help?

As a temporary measure; it does not replace proper ventilation.

Bathroom solutions in Ticino

AcquaKlima Sagl solves moisture problems, installs fans and renovates bathrooms across Ticino. Learn more about plumbing and bathroom renovation or get in touch.

From the blog

Need a quote or a call-out?

Call us or message us on WhatsApp: we reply in Italian, French, German and English.