24/7 on call

The shower upgrade ideas that make the biggest difference are a thermostatic mixer for stable temperature, a well-chosen shower head (rain shower plus hand shower), sufficient water pressure and flow, a walk-in or low-threshold layout, good lighting and easy-clean surfaces. Some upgrades, such as changing the shower head or mixer, can be done in a day. Others, like converting a bath into a walk-in shower, involve drainage, waterproofing and tiling and are best planned as part of a partial bathroom renovation. Before buying, check what your pipes and water pressure can deliver.

Quick upgrades

Upgrade Benefit Effort
Thermostatic mixer Stable temperature, lower scald risk Plumber, usually short job
New shower head Better spray, possibly less water Often DIY
Rain shower set (exposed) Overhead shower without opening the wall Plumber, short job
Shelf or niche Storage, tidier look Simple if surface-mounted
New shower screen Better look, easier cleaning Measuring and fitting

Thermostatic mixers

A thermostatic mixer keeps the water temperature stable even when someone opens a tap elsewhere in the house. Hot water can cause scalds. A suitable thermostatic mixer at the point of use can reduce the risk if it is correctly chosen, installed and maintained, and coordinated with the hygiene requirements of the hot water system; the temperature stop does not replace supervising children. Replacing a single-lever mixer with a surface-mounted thermostatic model is one of the most noticeable upgrades for little effort. In areas with hard water, choose a model with an easily accessible cartridge; see hard water in Ticino.

Rain showers

A large overhead shower feels luxurious, but it needs enough flow and pressure to work well. In older houses or on top floors, pressure may be limited. A good set combines a rain shower with a hand shower for rinsing and cleaning. Exposed shower systems can be fitted to existing connections without opening the wall; concealed systems look sleeker but involve more work.

Water pressure and flow

  • Low pressure can come from scaled aerators, partly closed valves, old galvanised pipes or the building’s supply.
  • Uneven temperature often points to undersized pipes or a mixer without thermostatic control.
  • A plumber can measure pressure and flow and tell you which shower set will work.

Walk-in and low-threshold showers

Replacing a shower tray with a step, or a bath, with a walk-in shower makes the bathroom more comfortable and more accessible. It requires enough fall for the drain, proper waterproofing and often new tiling. The choice between a linear drain and a point drain affects the floor’s slopes and tile layout. Plan it as part of a partial renovation; see the bathroom renovation timeline.

Lighting and ventilation

Good light in the shower area, for example a waterproof recessed light or an LED strip in a niche, changes the feel of the space. An effective extractor fan removes moisture, prevents mould and keeps the glass clear for longer. These are often overlooked but make daily use more pleasant.

Easy-clean surfaces

  • Large-format tiles mean fewer grout lines.
  • Coated glass helps water run off.
  • Frameless or minimal-frame screens have fewer corners where dirt collects.
  • A squeegee after each shower keeps glass and tiles clear.

Saving water and energy

Showers account for a large share of hot water use. Water-saving shower heads reduce flow while keeping a pleasant spray. Since less hot water is used, the boiler or heat pump uses less energy too. Look for products with a good energy and water label and test the spray in a showroom if possible.

Accessibility

A level-access shower, a fold-down seat, grab bars and a hand shower on a slide rail make the bathroom usable at every age. If you are renovating anyway, plan reinforcement in the walls for future grab bars. It costs little now and saves work later.

Example: bathroom in Tenero

A couple find their shower uncomfortable: the temperature fluctuates and the old tray has a high step. In a first step, the plumber installs a surface-mounted thermostatic rain shower set, which solves the temperature problem immediately. A year later, the tray is replaced with a level-access shower with a linear drain and a new glass screen as part of a partial renovation.

Common mistakes

  • Buying a large rain shower without checking pressure and flow.
  • Choosing a mixer with hard-to-reach cartridges in a hard water area.
  • Forgetting ventilation.
  • Underestimating the work for a walk-in conversion.

Frequently asked questions

Can I install a rain shower without opening the wall?

Yes, with an exposed shower system connected to the existing outlets.

Is a thermostatic mixer worth it?

For comfort and safety, yes, especially in family homes.

How long does a walk-in conversion take?

It depends on drainage and tiling; usually longer than a simple fixture change.

Shower upgrades in Ticino

AcquaKlima Sagl installs mixers, shower systems and walk-in showers across Ticino. Learn more about plumbing and bathroom renovation or get in touch.

From the blog

Need a quote or a call-out?

Call us or message us on WhatsApp: we reply in Italian, French, German and English.